Polebox
Polebox
Mounting and installation products
EV-charger pole mount
NEXT GREEN POLEBOX
Menu
Mounting and installation products
EV-charger pole mount
NEXT GREEN POLEBOX
Next Green Polebox is a tube or pole mount for EV-charging boxes for mounting on a 60 mm steel tube or pole. Polebox makes it easy, for example when changing from engine heater location to charging location and can therefore be used to replace an engine heater hood. The product is intended for feeding electrical cables inside the tube or pole.
Polebox has a built-in distribution terminal for up to 2 x 5G25 mm2 power cable for extending the connection to the next charging post. From the distribution terminal in the Polebox, the respective charging box is then connected using a 5G2.5 mm2 rubber cable.
Polebox comes with a DIN rail to mount RCCB/RCBO and can be equipped with an additional DIN rail for units such as a Wi-Fi-router or a 3G/4G modem or power supply.
Everything fits neatly inside the box. Polebox is made of Swedish steel and powder coated to provide the highest quality.
Polebox is made to fit many different charger models. Mounting holes for each charger are drilled upon installation.
Polebox is very easy to install. It is prepared indoors by mounting the EV-chargers and installing the wiring from the distribution terminal. Polebox is then put in place outside on the existing steel tube and the charger hood is lifted and fastened. This provides easy to access for screwing supply wires into the distribution terminal.
The Next Green Polebox series is prepared with DIN-rail for RCBO or RCCB inside the cabinet.
The pictures show the Next Green Polebox 205 D2.
E-Number: 27 004 12
Product name: Charging box mount Polebox Compact
MOUNTING PLATES ARE AVAILABLE FOR THE FOLLOWING EV-CHARGERS
Mountingplates are ordered separately on above E-numbers. Two mounting plates are needed.
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 8 kg
Height 403 mm
Width 381 mm
Depth 440 mm
Weight 8,1 kg
Height 455 mm
Width 455 mm
Depth 250 mm
E-Number: 27 004 54
Product name: Charging box mount Polebox Compact Ceiling
MOUNTING PLATES ARE AVAILABLE FOR THE FOLLOWING EV-CHARGERS
Mountingplates are ordered separately on above E-numbers. Two mounting plates are needed.
Pulverlackerad Magnelis®, höghållfast stål
Grafitgrå
Weight 8 kg
Height 432 mm
Width 235 mm
Depth 235 mm
Weight 8,1 kg
Height 455 mm
Width 455 mm
Depth 250 mm
E-Number: 24 803 57
S-No: 35 063 01
Product name: Charging box mount Polebox 190 S
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 9 kg
Height 552 mm
Width 351 mm
Depth 295 mm
Mounting surface 190 mm
Weight 9 kg
Height 575 mm
Width 310 mm
Depth 180 mm
E-Number: 24 804 40
S-No: 35 063 03
Product name: Charging box mount 205 D2
SELECTION OF COMPATIBLE EV-CHARGERS
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 11 kg
Height 552 mm
Width 362 mm
Depth 470 mm
Mounting surface 203 mm
Weight 11 kg
Height 570 mm
Width 390 mm
Depth 205 mm
E-Number: 24 803 65
S-No: 35 063 07
Product name: Charging box mount Polebox 270 S
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 10 kg
Height 552 mm
Width 432 mm
Depth 295 mm
Mounting surface 270 mm
Weight 10 kg
Height 570 mm
Width 390 mm
Depth 205 mm
E-Number: 27 000 70
S-No: 35 063 08
Product name: Charging box mount Polebox 270 D
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 10 kg
Height 552 mm
Width 432 mm
Depth 437 mm
Mounting surface 270 mm
Weight 10 kg
Height 595 mm
Width 410 mm
Depth 210 mm
E-Number: 27 007 99
Product name: Charging box mount Polebox 270 Q
Steel, High-strength steel, Magnelis®
Graphite grey
Weight XX kg
Height 492 mm
Width 270 mm
Depth 372 mm
Mountingsurface(hxw) 4x 216×424 mm
Weight XX kg
Height XX mm
Width XX mm
Depth XX mm
E-Number: 24 803 66
S-No: 35 063 30
Product name: Charging box holder Polebox 330 S
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 12 kg
Height 552 mm
Width 515 mm
Depth 342 mm
Mounting surface 330 mm
Weight 12 kg
Height 570 mm
Width 390 mm
Depth 210 mm
E-Number: 27 002 50
S-No: 35 063 31
Product name: Charging box holder Polebox 330 D
Steel, High-strength steel, Magnelis®
Graphite Grey
Weight 12,1 kg
Height 552 mm
Width 514 mm
Depth 492 mm
Mounting surface 330 mm
Weight 12,5 kg
Height 600 mm
Width 460 mm
Depth 220 mm
E-Number: 27 004 91
S-No: 35 063 27
Product name: Charging box mount Polebox 320 D
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 12,8 kg
Height 671 mm
Width 481 mm
Depth 470 mm
Mounting surface 320 mm
Weight 13 kg
Height 688 mm
Width 490 mm
Depth 215 mm
E-Number: 24 803 64
S-No: 35 063 09
Product name: Charging box holder Polebox 205 ES
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 9 kg
Height 592 mm
Width 367 mm
Depth 295 mm
Mounting surface 205 mm
Weight 9 kg
Height 600 mm
Width 400 mm
Depth 300 mm
E-Number: 27 001 77
S-No: 35 063 10
Product name: Charging box mount Polebox 205 ED
Steel, High-strength steel, Magnelis®
Graphite grey
Weight 9 kg
Height 592 mm
Width 367 mm
Depth 437 mm
Mounting surface 205 mm
Weight 9 kg
Height 600 mm
Width 400 mm
Depth 450 mm
